Архив форумов ЦИТФорума

[BorisK]

Подскажите, пожалуйста, почему не хочет регистрировать пользователя
у провайдера?

Команда ifconfig -a выдает вот что:

xl0: flags=8843 mtu 1500
inet 192.168.1.126 netmask 0xffffff00 broadcast 192.168.1.255
inet6 fe80::250:daff:fe43:f054%xl0 prefixlen 64 scopeid 0x1
ether 00:50:da:43:f0:54
media: Ethernet autoselect (100baseTX)
status: active
rl0: flags=8843 mtu 1500
inet 80.80.98.34 netmask 0xffffff00 broadcast 80.80.98.255
inet6 fe80::250:baff:fe5f:5e48%rl0 prefixlen 64 scopeid 0x2
ether 00:50:ba:5f:5e:48
media: Ethernet autoselect (100baseTX )
status: active
lp0: flags=8810 mtu 1500
lo0: flags=8049 mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
inet 127.0.0.1 netmask 0xff000000
ppp0: flags=8010 mtu 1500
sl0: flags=c010 mtu 552
faith0: flags=8000 mtu 1500
tun0: flags=8051 mtu 1500
inet6 fe80::250:daff:fe43:f054%tun0 prefixlen 64 scopeid 0x8
Opened by PID 104


Это файл ppp.conf :

#################################################################.. PPP Sample Configuration File
# Originally written by Toshiharu OHNO
# Simplified 5/14/1999 by wself@cdrom.com
#
# See /usr/share/examples/ppp/ for some examples
#
# $FreeBSD: src/etc/ppp/ppp.conf,v 1.2.2.5 2001/07/13 10:55:23 brian Exp $
#################################################################
.. set log Phase tun command # you can add more detailed logging if you wish
set ifaddr 80.80.98.34/0 10.0.0.2/0
set mtu 1492
set mru 1492

papchap:
set device PPPoE:rl0 # replace rl0 with your ethernet device
set authname MyName
set authkey MyPassword
set dial
set login
add default HISADDR

А это ppp.log :

Apr 27 09:46:50 ns ppp[104]: tun0: Phase: deflink: Connected!
Apr 27 09:46:50 ns ppp[104]: tun0: Phase: deflink: opening -> dial
Apr 27 09:46:50 ns ppp[104]: tun0: Phase: deflink: dial -> carrier
Apr 27 09:46:51 ns ppp[104]: tun0: Phase: Received NGM_PPPOE_SUCCESS (hook "tun0")
Apr 27 09:46:51 ns ppp[104]: tun0: Phase: deflink: carrier -> login
Apr 27 09:46:51 ns ppp[104]: tun0: Phase: deflink: login -> lcp
Apr 27 09:46:51 ns ppp[104]: tun0: Phase: deflink: his = PAP, mine = none
Apr 27 09:46:51 ns ppp[104]: tun0: Phase: Pap Output: Epintourist_ll34 ********
Apr 27 09:46:51 ns ppp[104]: tun0: Phase: Pap Input: FAILURE (Password validation failure)
Apr 27 09:46:51 ns ppp[104]: tun0: Phase: deflink: Disconnected!
Apr 27 09:46:51 ns ppp[104]: tun0: Phase: deflink: lcp -> logout
Apr 27 09:46:51 ns ppp[104]: tun0: Phase: deflink: logout -> hangup
Apr 27 09:46:51 ns ppp[104]: tun0: Phase: deflink: Disconnected!
Apr 27 09:46:51 ns ppp[104]: tun0: Phase: deflink: Connect time: 1 secs: 92 octets in, 90 octets out
Apr 27 09:46:51 ns ppp[104]: tun0: Phase: deflink: : 104 packets in, 105 packets out
Apr 27 09:46:51 ns ppp[104]: tun0: Phase: total 182 bytes/sec, peak bytes/sec on Sat Apr 27 09:46:51 2002
Apr 27 09:46:51 ns ppp[104]: tun0: ...

[kbm]

9:
set device PPPoE:ed0:9 # replace xl1 with your ethernet device
set authname XXXXXXX
set authkey XXXXXXX
set dial
set login
add default HISADDR

при зфпуске ppp указать ppp -ddial 9 но бывают глюки если не пошло идешь убиваешь процесс и запускаешь заново.

[BorisK]

У меня все равно не получается